Need help?Do you have a question about the Agilent Technologies L34410A and is the answer not in the manual?
General| Model | L34410A |
|---|---|
| Category | Multimeter |
| Manufacturer | Agilent Technologies |
| Digits | 6.5 |
| Display | LCD |
| DC Voltage Range | 100 mV to 1000 V |
| AC Voltage Range | 100 mV to 750 V |
| Resistance Range | 100 Ω to 100 MΩ |
| Interface | USB |
| DC Current Range | 10 mA to 10 A |
| AC Current Range | 10 mA to 10 A |
Steps to verify and prepare the multimeter for operation.
Explains front panel keys and operations.
Guides through common measurement procedures.
Details front panel display, messages, and menus.
Details how to configure measurement settings via menus.
Covers multimeter state storage and other advanced settings.
Explains how to reset the multimeter to factory settings.
Details dB, dBm, statistics, and limit testing functions.
Explains trigger sources and modes.
Describes how to set up and use the data logger.
Covers self-test, error conditions, and calibration.
Details LAN connection setup and parameters.
Discusses thermal EMF and loading errors in DC measurements.
Explains true RMS AC measurement principles.
Covers making high-speed AC and DC measurements.
Provides detailed DC measurement specifications.
Provides detailed AC measurement specifications.
Lists specifications for frequency and period measurements.
Details specifications for capacitance measurements.
Lists specifications for temperature measurements.
Explains how to calculate total measurement error.
Provides settings for optimal measurement accuracy.
To Next Page