EasyManua.ls Logo

AGM 520 E - Mounting and Use of Shoulder Strap

AGM 520 E
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
AGM
520 E (GB)
WARNING DANGER
Before you start work, please check the shoulder strap and make sure that
everything is all right. In case of danger, immediately stop the engine-
powered line trimmer (trimmer) and pull the hook of the quick-release lock;
the line trimmer will be detached from your body.
MOUNTING AND USE OF SHOULDER STRAP
1. Assemble and adjust the shoulder strap and the belt, as shown.
2. Adjust the button on the shoulder strap and move the buckle to your belt, and
then adjust the belt (if there is one).
3. Attach the hanger to the hook (buckle) of the harness.
4. If the engine-powered line trimmer is not balanced, adjust the strap hanger and
the handle, until it balances out.
5. To unhook the motor-powered line trimmer (trimmer) from the strap, pull the
hook of the quick-release lock up.
6. Insert the lock tongue into the slot of the quick-release lock in order to reattach
the engine-powered line trimmer to the straps.
WARNING ATTENTION
The buckle is located on your right hip and the quick-release lock is located on
the outer side.
Shoulder
strap
Buckle
Belt
Shoulder
strap
button
Buckl
e
Quick - release lock
Groun
d
Cutting
accessory
Aluminum
pipe
Strap
hanger
Hanger
Quick-release lock
Pull