AGM 520 E - Prolonged Storage Guidelines

To Next Page

To Previous Page

AGM

520 E (GB)

TRANSPORT AND STORAGE

TRANSPORT, HANDLING

 The engine must be switched off when you are transporting the device between

the working areas.

 After stopping the engine, the exhaust is still hot. Never touch hot parts such as

exhaust.

 Make sure that fuel is not leaking from the tank.

 Wait for the engine to cool down, empty the fuel from the tank and secure the

device from moving around before transporting it in a vehicle. If the blade is

mounted, always use the protective blade cover. Blade protection (cover)

should be used during transportation or when you are working on the device.

PUTTING THE PROTECTION ON THE BLADE

Open the protective blade cover, place it on the blade and then put the ---- in the

notches on the cover.

Blade cover

Blade

MOUNTING THE COVER ON THE

BLADE

Dowel

Notch

Max speed

10000 rpm