EasyManua.ls Logo

AGM 520 E - Page 55

AGM 520 E
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
AGM
520 E (GB)
WARNING DANGER
Always put the blade protection (cover) on the blade when the device is not
in use. Remove the protective cover before using the device. Unless it is
removed, the protective cover may become a thrown object when the blade
starts rotating.
WARNING DANGER
Make sure you empty the fuel tank before transportation in order to avoid
fuel leak.
To avoid the engine-powered line trimmer being damaged or people being
injured by the cutting equipment, remove the cutting accessory, return the
trimmer to factory settings and put the parts into boxes. Before the
transport, all the parts should be packed and safety should be checked.
WARNING DANGER
Do not store the device in enclosed rooms where the fuel fumes can come
into contact with the open flame from a water heater, heater, stove etc. Only
store in a locked and well-ventilated space.
STORING FOR A PROLONGED PERIOD
Examine, clean and repair the device if necessary.
Empty all the fuel from the tank.
Start the engine. This will use up all the fuel from the fuel leads and the
carburetor.
Remove the spark plug and pour one spoonful of pure engine oil into the
opening from which you removed it and then replace the spark plug.
Store in a clean dry space where there is no dust.