Agria 5300 - Page 24

3
Devices and Operating Elements
24
Meadow mower agria 5300
Driving wheels switching positions
• Rigid drive:
Push both driving wheels all
the way inwards and let the catch springs
engage in the inner ring grooves (Fig. K). If
the catch springs do not engage, rotate the
drivin
g wheels a little and press the driving
wheel axially inwards until the coupling
toothing engages noticeably.
• Neutral:
Push both driving wheels outwards
and let the catch springs engage in the outer
ring grooves (Fig. L).
• Drive with differential-like effect:
Engage
one driving wheel in the inner ring groove
(Fig. K), and the second driving wheel in th
e
outer ring groove (Fig. L) - neutral.
Wrap protection
Wrap protection tubes are fitted to the
wheel
shaft on both sides, between the gearbox and
the driving wheel (Fig. M). They mostly prevent
the grass from being wrapped around the wheel
shaft. To remove wrapped up grass, simply
remove the driving wheels and the wrap protec-
tion tubes without tools.