Troubleshooting and Remedies
56
Meadow mower agria 5300
Fault Possible cause Remedy Page
Petrol engine
works erratically
Control linkage contaminat-
ed, sticking
Clean control linkage BM
Engine does not
stop in stop
position
Engine stop line defective,
Missing ground
Check line and connections
- agria-Service -
Check ground contact
- agria-Service -
Petrol engine
has insufficient
power
Cylinder head loose or gas-
ket damaged
Tighten cylinder head, replace
gasket
- agria-Service -
Insufficient compression Have engine checked
- agria-Service -
Air filter contaminated Clean air filter BM
Machine
Fault Possible cause Remedy Page
Traction drive or
mower drive does
not come to a
standstill when
the clutch is
pulled
Clutch or safety hand lever not
correctly adjusted
Adjust the clutch
48,
49
Clutch slips Clutch or safety hand lever not
correctly adjusted
Adjust the clutch
48,
49
Excessive vibra-
tion
Fixing screws loose Tighten fixing screws 52
Irregular cut
and/or mowed
material gets
stuck between the
knives
Mower knives blunt Sharpen mower knives 47
Knife guides incorrectly ad-
justed
Adjust knife guides 46,
45
Knife not straight Have knives aligned or replaced *
Knives are not aligned Have knives aligned *
Knives are not on top of each
other
Have cutter bar aligned *
To Next Page
Loading...
