EasyManua.ls Logo

Agria 5300 - Page 47

Agria 5300
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Maintenance and Repair
Meadow mower agria 5300
47
Sharpening the mower knives
Wear protective goggles and protec-
tive gloves.
Depending on their utilisation, the mow-
er knives are blunt after 4 ... 20 operat-
ing hours so that regrinding is neces-
sary.
It is advisable to use a hand-held grinder
working at approx. 15.000 ... 20.000 rpm
in conjunction with a cup-shaped grind-
ing pen with a diameter of 25 mm and a
length of approx. 35 mm, or a special
sharpening device.
Sharpening the mower knives is
very important for achieving clean and
trouble-free mowing.
Only the face side of the grinding
pin is used for grinding, moving from
the back of the knife to the tips of
the knives.
The blades must not heat up. They
are useless (annealed and soft)
when they turn blue.
Do not chamfer the knives at the
front (P).
Do not grind the cutting edges in a
curve (P).
Remove burrs with a hand stone.

Related product manuals