To Next PageTo Next Page
Need help?Do you have a question about the Agria 5100 Rabbit and is the answer not in the manual?
Explains warning and informational symbols for safe operation and identification.
Identifies and labels the main mechanical parts of the grassland mower.
Identifies and labels the various control levers on the steering handle.
Provides guidance on recommended lubricants, fuel types, and maintenance practices.
Step-by-step instructions for unpacking the machine and assembling the steering handle.
Defines intended use, general accident prevention, and operator responsibilities.
Details safe practices for starting, operating, and handling the machine.
Covers safety precautions when attaching, using, and detaching cutter bars and other implements.
Outlines safety measures for cleaning, routine maintenance, and proper storage of the mower.
Explains electrical safety and the meaning of various warning signs and symbols.
Details the physical size, weight, and key measurements of the grassland mower.
Specifies tyre size, recommended pressure, and clutch system details.
Outlines the transmission type and available forward/reverse ground speeds.
Details specifications for the mowing drive mechanism and steering handle features.
Provides data on operator's ear noise level and vibration acceleration values.
Provides comprehensive technical data for the engine, including type, dimensions, power, and ignition.
Details fuel tank capacity, fuel type recommendations, and air filter type.
Specifies carburetor type, settings, and engine oil type and filling quantity.
Details the machine's capability for operation on inclined surfaces.
Describes the engine, its break-in period, and general operation recommendations.
Explains the cooling system maintenance and the importance of correct idling speed.
Details the air filter's function and the engine's electronic ignition system.
Explains the operation and safety features of the speed control and engine shut-off lever.
Details the function and safety mechanisms of the machine's safety circuit lever.
Explains the V-belt clutch operation for transmission and mowing drive engagement.
Describes the transmission system, including forward/reverse speeds and clutch engagement.
Explains how to engage and disengage the mowing drive using the specific lever.
Details how to adjust the steering handle's height and side position for optimal use.
Explains how to attach wheels, use wheel dogs for pushing or turning, and remove wheels.
Step-by-step guide for securely attaching the cutter bar to the mower base machine.
Instructions on safely removing and installing new mowing knives on the cutter bar.
Explains how to adjust the running bases for different stubble heights and ensure a clean cut.
Steps for initial machine setup, including checking fuel and filling engine oil.
Detailed steps for safely starting the engine, including choke and lever positions.
Instructions for properly stopping the engine, including idling and closing the fuel tap.
Steps for engaging the mowing drive, operating the machine, and handling blockages.
Safety precautions and techniques for operating the mower on inclines.
Details maintenance requirements for the worm gear and V-belts, including inspection and replacement.
Instructions for checking and adjusting the play in the clutch levers for optimal operation.
Covers lubrication of steering handle bolts and drive-wheel checks, including tyre pressure.
Details lubrication of the wheel shaft and maintenance of the cutter bar and its parts.
Instructions for cleaning the cutter bar, lubricating the knife driver pin, and checking the O-ring.
Covers greasing the carrier pin and adjusting the knife guiding devices for blade protrusion.
Provides detailed instructions and safety precautions for grinding the mower blades.
Guides on checking the engine oil level and performing oil changes at specified intervals.
Instructions for cleaning, inspecting, and replacing the air filter element.
Covers checking fuel hoses, cleaning the fuel tank and strainer, and addressing excessive fuel supply.
Details spark plug cleaning, adjustment, replacement, and checking ignition sparks.
Instructions for cleaning the cooling fan grille and internal cooling fins.
Covers cleaning governor linkages, exhaust area, and ensuring correct speed control adjustment.
Guidance on re-adjusting carburetor settings for varying conditions.
Checks the safety circuit function and general maintenance points like bolts and lubrication.
Instructions for cleaning the machine, especially after washing or using a pressure washer.
Guidelines for long-term storage, engine preservation, drive-wheel support, and corrosion prevention.
Shows the electrical wiring diagram and identifies key electrical components and their connections.
Lists available spray varnishes and essential wear parts like filter elements and belts.
Details emergency tyre repair gel and a list of spare parts for the mower and engine.
Addresses problems like the engine not starting, misfiring, and stalling, with possible causes and remedies.
Covers engine overheating, low output, and issues with smooth running or stalling.
Solutions for the engine not stopping correctly or having reduced output.
Addresses problems with wheel drive, excessive vibration, and uneven cutting caused by knives.
A visual guide indicating lubrication points on the machine and their corresponding maintenance schedule.
A comprehensive table detailing inspection and maintenance tasks with frequencies and responsibilities.
Identifies and labels specific parts of the Honda GCV160 engine.
Official statement confirming the machine complies with relevant EC directives and standards.
General| Brand | Agria |
|---|---|
| Model | 5100 Rabbit |
| Category | Lawn Mower |
| Language | English |
