agria Grassland Mower 5100 35
5. Maintenance
5
Governor
For smooth engine performance keep
governor linkages, springs and actuat-
ing devices clean and free from dust and
dirt. Do not bend or twist parts. (Gover-
nor linkages on carburetor C/6).
Exhaust system
Regularly clean the area around the
exhaust (C/9) from grass, dirt, and in-
flammable deposits.
– Risk of fire!
Check before each operation.
Speed Control
Devices for actuating engine speed
must be adjusted correctly to start, op-
erate and shut off the engine at correct
speed rates.
è - Serviceç
Carburetor settings
To compensate for fuel, temperature,
height or load variations, a slight car-
buretor re-adjustment may become nec-
essary. Only let the engine run with the
air filter and air filter cover mounted.
è - Serviceç
1
2
1 Idle speed setting screw
2 Throttle stop screw
To Next Page
Loading...
