agria Grassland Mower 5100 37
5. Maintenance
5
Storage
For longer periods of no operation:
a) Clean thoroughly, repair paint coat
b) Spray all shining parts, in particular cutter bar, with Bio-
slushing oil.
c) Engine preservation
l
Drain the fuel completely from the system and let the
engine run until it comes to stop due to lack of fuel or fill the
fuel tank, add fuel stabilizer (agria No. 799 09) to the fuel
tank
- Observe instructions
Operate the engine for approx. 1 minute.
l
Change the engine oil.
l
Fill a tea-spoon (approx. 0.03l) of engine oil into spark
plug opening. Slowly crank the engine.
l
Reinstall the spark plug and set the piston to compres-
sion with the recoil starter to keep the valves closed.
l
Slowly crank the engine every 2–3 week (spark-plug con-
nector is removed). Then set the piston to compression again.
d) Drive-wheels
Support drive-wheels in such a way that tyres have no ground
contact. Pneumatic tyres are quickly destroyed, if left stand-
ing under load and uninflated.
e) Disengage drives
Always store the mower with all drives disengaged (position
“0”) to avoid clutch problems.
f) Storing the machine
To avoid severe corrosion:
- to preserve the machine from atmospheric influences
Do not park the machine in:
- humid rooms
- in rooms where fertilizer is stored
- in stables or adjacent rooms.
g) Protect machine
with cloth or a similar cover.
To Next Page
Loading...
