Agria 5300 - Page 41

5
Maintenance and Repair
Meadow mower agria 5300
41
• Remove the fan housing after every
100
operating hours or at least yearly
, ideally
before the season. Clean the cooling fins on
cylinder and cylinder head, and the deflector
plates and the fan wheel that are necessary
for air circulation.
- agria-Service -
Exhaust system and speed governor
Regularly check the exhaust system (B/9), gov-
ernor lever, linkage and governor springs for
soiling and plant debris and clean wi
th a brush or
compressed air if necessary. Danger of fire
-
due to dirty exhaust system!
Check before each start-up.
Replace damaged exhaust parts.
Handle hot engine components with caution!
Idle speed
Always ensure that the engine idle speed is adjusted correctly. With speed regulat-
ing lever at idling, the engine should continue running smoothly.
- agria-Service -
All further maintenance and care of the engine Engine operating
instructions