Need help?Do you have a question about the AGS 900 and is the answer not in the manual?
Physical measurements of the gate operator unit.
Weight details for the operator and related packages.
Electrical power needs for the gate operator.
Specifies the maximum gate weight and length limits.
Lists items provided with the standard gate opener package.
Elaborates on power supply options and wiring requirements.
Describes two primary ways to mount the gate operator.
Highlights sensitivity, soft start/stop, electronic brake, and battery/solar options.
Basic open/stop inputs for standard capability control boards.
LEDs for installation and troubleshooting assistance.
Feature that automatically closes the gate after a set time.
Adjusts force to stop/reverse gate on obstruction.
Connects two operators for dual gate automation.
Details on power supply, open, pulse, safety, and stop inputs.
Visual identification and detailed list of operator parts.
Describes adding an extension to the gate for operator clearance.
Details on post mounting the operator to the ground.
Digging a hole and setting operator in cement.
Alternative mounting on a pre-formed cement pad.
Securing operator to a concrete mounting stand.
How to thread the drive chain and adjust side plates.
Connecting gate brackets and tensioning the drive chain.
How to position limit nuts against limit switches.
Running 115V power via conduit and flexible fitting.
Connecting hot, neutral, and ground wires to the operator.
Connecting battery, charger, and low voltage cable for backup.
Connecting burial cable to charger and plugging into power.
Attaching solar panel and running wires for solar power.
Connecting battery wires for solar-powered models.
Wiring external devices to the standard control board.
Connecting devices for gate opening and stopping.
Wiring external devices to the full systems control board.
Details on safety, pulse open, stop, and close inputs for full systems.
Diagrams for common accessories on both control boards.
Connecting devices for gate activation by vehicles.
Adjusting gate sensitivity on standard control board.
Adjusting gate sensitivity on full systems control board.
Adjusting the automatic gate closing time.
Adjusting switch for gate operation direction.
Changing switch settings for security and matching.
Wiring diagram for master/slave configuration on standard board.
Wiring diagram for master/slave configuration on full systems board.
Detailed wiring diagram for 115V full systems capability.
Wiring diagram for battery back-up full systems capability.
Wiring diagram for 115V standard capability.
Wiring diagram for battery back-up standard capability.
Wiring diagram for solar powered standard capability.
Instructions for installing the GC842 safety edge.
Instructions for installing the GC847 Miller safety edge.
Connecting a timer to illuminate the area when activated.
Option for longer gate open times before auto-closing.
Installing a siren for audible warning of gate movement.
Identifies and illustrates key gate hardware components.
Regular checks for safety equipment sensitivity.
Routine checks for chain, wheels, and guide rollers.
Key safety warnings for installation.
General safety advice for operation.
Troubleshooting transmitter faults and gate travel distance issues for standard models.
Troubleshooting reversing, opening/closing, and stopping issues for standard models.
Understanding LEDs and troubleshooting transmitter faults in full systems capability.
Troubleshooting gate travel and obstruction stop failures in full systems capability.
Troubleshooting reversing, gate closure, and timer issues in full systems capability.
Troubleshooting unidirectional operation and general faults in full systems capability.
Notes on reading the manual and transferring it to new owners.
Warnings regarding gate size limits and safe usage.
General| Brand | AGS |
|---|---|
| Model | 900 |
| Category | Gate Opener |
| Language | English |
To Next Page
