AGV INSYDE - Switching Music Sources; Voice Commands

14
2. When you hear a station you want to select, tap .
x1
To store a scanned station in the active preset:
• Tap
x1
within 20" of stopping the scan.
3.5 SWITCHING MUSIC RESOURCES
If two music (A2DP) audio sources are paired, INSYDE uses the audio source from which you last
played music.
To switch to the other audio source:
1. Stop music (A2DP) playback from the current device (see Listening to Music).
2. Play music (A2DP) from the other device.
→ INSYDE automatically remembers your last played device.
3.6 VOICE COMMANDS
You can use voice commands for hands-free operation of certain INSYDE features. Voice com-
mands use voice recognition. You loudly say a command and INSYDE performs the action. Voice
commands are available in various languages. English is the default language. You can change
the language to another available language.
INSYDE uses the following predefined voice commands.
TO: SAY:
Turn on the radio "Hey Cardo, radio on"
Turn off the radio "Hey Cardo, radio off"
Jump forward to the next preset radio station "Hey Cardo, next station"
Jump backward to the previous preset radio station "Hey Cardo, previous station"
Turn on music "Hey Cardo, music on"
Turn off music "Hey Cardo, music off"
Play the next music track "Hey Cardo, next track"
Play the previous music track "Hey Cardo, previous track"
Raise volume "Hey Cardo, volume up"
Lower volume "Hey Cardo, volume down"
Mute audio "Hey Cardo, mute audio"
Unmute audio "Hey Cardo, unmute audio"
Call the default number (configurable) "Hey Cardo, speed dial"