6
2 GETTING STARTED
2.1 GETTING TO KNOW YOUR INSYDE
2.2 CHARGING INSYDE
Make sure that your INSYDE battery is charged for at least 4 hours before initial use.
To charge the unit:
Using the supplied USB cable, connect your computer or wall charger to the USB port on your
INSYDE.
Charging with the wall charger is fast-
er than via a computer USB port.
Charging your unit switches it off auto-
matically. To use your unit while it is
being charged, switch it on (see
Switching your unit on/off).
While charging, the LED indicates the charging
status as follows:
• red LED on: charging
• red LED off: charging complete
You can check the battery charge at
any time by saying “Hey Cardo, bat-
tery status.”
intercom mobilemedia
volume up volume down
LED
USB charging USB charging
and firmware upgradeand firmware upgrade
To Next Page
Loading...
