29
Object Default value Description Cardo Connect
(iOS / Android)
Mobile priority Mobile 1 If you paired your unit to two mobile phones, you must set
one of them as the default phone for outgoing calls.
yes
Parallel audio
streaming in
Bluetooth
®
mode
(Enable/Disable)
Disable You can hear two audio sources simultaneously. For
example, hear GPS while listening to music. Note:
Parallel audio streaming may not work properly with
some iOS devices (i.e., music player or GPS navigator) due
to connected device limitations.
yes
RDS (Enable/Disable) Disable Radio Data System allows the radio to automatically
retune to the strongest frequency available for the FM
station you are listening to when the signal becomes too
weak.
yes
Set speed dial numbers Empty Pre-set phone numbers for automatic dialing. yes
Set the 6 FM radio
presets
107.5 Pre-set FM radio stations. yes
Spoken Status
Announcements
(Enable/Disable)
Enable Voice announcements inform you to whom or to what
device you are connected.
yes
Voice Control Enable Enable Voice activation (by saying a word or phrase loudly) of
certain features for hands-free operation.
yes
Voice Control
Sensitivity
Medium Microphone sensitivity for voice activation functionality. yes
AGC and voice control performance vary based on environmental conditions, including rid-
ing speed, helmet type and ambient noise. For improved performance, minimize the wind
impact on the microphone by closing the visor and using the large microphone sponge.
To Next Page
Loading...
