AHB BREWDEVIL B40 - More Functions & Setting Tips; Delay Start, Temperature, and Boiling Point Settings; Unit Switching and Wi-Fi Configuration

8
9. More Functions & Setting Tips
Delay Start Function
1. Turn on the switch, display light up.
2. Press on/off button, then press setting button then enter delay start timer
setting, the timer range is 0-48hours. There’s beep sound reminder when timer
finishes the count down.
Temperature
Calibration
1. When the machine is stop working, pressing the on/off button for 3 second until
the page show current temperature.
2. Pressing “+” and “-” at the same time active the C1 temperature calibration,
press on/off button for confirmation the setting. The setting range is from +10℃
to -10℃.
Boiling Point
Compensation Setting
1. When the machine is working, pressing the on/off button for 5 seconds until
the page show current temperature.
2. Pressing “+” and “-” at the same time activates the C1 temperature calibration.
3. Press set button again to active the C2 Boiling point compensation setting. This
adjustment is only effective on temperature above 90℃, the setting range is 0
- 10℃.
Switching Centigrade /
Fahrenheit
1. Turn on the switch and pressing “+” button for 5 second.
2. Press “+” button to choose the temperature unit, then press on/off button to
confirm.
Wi-Fi Setting Clearance
1. Long pressing setting button for 5 second to clear the phone matched to this
device before.
Matching Wi-Fi
1. Download Tuya App
2. Turn on the switch, Wi-Fi sign is flashing, find out the adding device button on
app.
3. When the app found the device, confirm, and add it, then input your Wi-Fi ID
and password.
4. After input the Wi-Fi ID and password then start to match the device to app till
adding device successfully and press finish button.