Page
7. MEASUREMENT 29
7.1 Continuous Measurement of a Measuring Point 29
7.1.1 Selecting the Measured Value and Measuring Point 29
7.1.2 Memory for Momentary Values 30
7.1.3 Memory for Peak Values 30
7.1.4 Smoothing by Sliding Averaging 30
7.1.5 Averaging 31
7.1.6 Volume Flow Measurement 33
7.1.7 Setting the Meas. Val. to Zero, Zero Pt Corr., Sensor Adjustment 34
7.1.8 Atmospheric Pressure Compensation 35
7.1.9 Temperature Compensation 36
7.2 Single Measuring Point Scan 36
7.3 Cyclic Measuring Point Scan 37
7.3.1 Print Cycle, Continuous Measuring Point Scan 37
7.3.2 Time and Date 38
7.4 Data Memory (Option S Data Logger) 38
7.4.1 Memory Connector 39
7.4.2 Data Acquisition 40
7.4.3 Output of Measuring Data 40
8. ANALOGUE OUTPUT 41
8.1 Scaling 41
9. DIGITAL DATA OUTPUT 42
9.1 Baud Rate, Data Format 42
9.2 Output Formats for Lists of Measuring Data 42
9.3 Manual Data Output 43
9.4 Device Address and Networking 44
10. TROUBLESHOOTING 45
11. ELECTROMAGNETIC COMPATIBILITY 46
APPENDIX 47
Technical Data
Product Overview
ALMEMO
2290-4 3
Table of Contents
To Next Page
Loading...
