Ahlborn ALMEMO 2590-2A - Page 5

2. Contents
5
12.5.1 Internal data memory ............................................................... 45
12.5.2 Memory connector with SD-card ............................................. 45
12.5.3 Date and time-of-day ............................................................... 46
12.5.4 Once-only output / saving of all measuring points ................... 46
12.5.5 Cyclic output / saving of all measuring points .......................... 46
12.5.6 Numbering of measuring operations ........................................ 47
12.5.7 Memory space, memory output, clearing the memory ............ 47
12.5.8 Scanning configuration ............................................................ 48
12.5.9 Starting and stopping measuring operations ........................... 51
13. Sensor programming ....................................................................... 53
13.1 Selecting the input channel .............................................................. 53
13.2 Measuring point designation ............................................................ 53
13.3 Averaging mode ............................................................................... 54
13.4 Locking the sensor programming .................................................... 54
13.5 Limit values ...................................................................................... 54
13.6 Scaling, Decimal point setting .......................................................... 55
13.7 Correction values ............................................................................. 55
13.8 Changing the units ........................................................................... 56
13.9 Selecting the measuring range ........................................................ 56
13.10 Function channels ............................................................................ 59
13.11 Special meas. ranges ,Linearization ,Multi-point calibration ............ 60
13.12 Special functions .............................................................................. 60
13.12.1 Print cycle factor ...................................................................... 61
13.12.2 Actions in the event of a limit value being exceeded ............... 61
13.12.3 Analog start and analog end .................................................... 62
13.12.4 Minimum sensor supply voltage .............................................. 62
13.12.5 Output function ......................................................................... 63
13.12.6 Reference channel 1 ................................................................ 63
13.12.7 Reference channel 2 or multiplexer ......................................... 63
13.12.8 Element flags ........................................................................... 64
14. Device configuration ........................................................................ 65
14.1 Device designation ........................................................................... 65