Follow these steps to create an AP, allowing
you to connect your PC to the device via
WiFi.
This is the most simple and direct WiFi con-
nection method and is ideal when you wish
to communicate with only one device
using one PC.
By default AiM system is configured as an
Access Point and creates a network without
a password completely accessible to
everyone.
So, for establishing the WiFi connection:
n
Be sure your AiM system has the WiFi
enabled.
n
Read its name in the lower part of the
Live Measures page.
n
Click the WiFi icon of Race Studio 3 and
select your AiM system.
CHAPTER 10 WIFI CONFIGURATION
20 21
EVO5
10.1 Configuring your device as an AP
In a few seconds the communication will be established.
For setting other parameters it is therefore recommended that you create a unique
password to secure your device/network immediately. With the use of a password, the
communication is secure and encrypted using the WPA2-PSK standard.
To Next Page
Loading...
