- 5 -
Coverage of calling, communication and monitoring
The following table shows the coverage of calling, communication, and monitoring from a tenant building and a main building.
NOTE: Performance depends on the settings. If you cannot call even when ✓ is indicated, its setting is not confi gured.
Incoming call
Same tenant building Other tenant buildings Same main
building
Other main
buildings
Entrance
st.
Guard
st.
Residential/
tenant st.
Entrance
st.
Guard
st.
Residential/
tenant st.
Entrance
st.
Guard
st.
Entrance
st.
Guard
st.
Tenant
building
Entrance st. Calling/
communication
-
✓✓
-- - ----
Guard st. Calling/
communication
✓✓ ✓
-- -
✓✓✓✓
Monitoring
✓
---------
Main
building
Entrance st. Calling/
communication
-
✓✓
-
✓✓
-
✓
-
✓
Guard st. Calling/
communication
✓✓ ✓ ✓✓ ✓ ✓✓✓✓
Monitoring
✓
--
✓
--
✓
-
✓
-
✓ : Possible — : Impossible
About the term "building" and "section":
The term "section" is used on the setting screens of entrance
stations and guard stations instead of "building".
"Section" and "building" have the same meaning in this manual.
Outgoing call
This manual describes how to use the entrance stations and guard stations. The use of them differs depending on the building/section (main or
tenant) where they belong. This manual uses the following icons to separate descriptions for the main and tenant buildings.
Icon Meaning
Main building/section
Tenant building/section
BUILDING #
01
UNIT #
1
CALLING METHOD
NAME / # SEARCH
SECT LIST+UNIT #
UNIT NUMBER
SECT # + UNIT #
Setting screen of
guard station
Standby screen of
guard station
e.g. e.g.
READ THIS BEFORE USING THE STATIONS
2
NOTES ABOUT USING THIS MANUAL
To Next Page
Loading...
