Menu bar
101
4.4. Restore System Settings
If the setting file is lost, the setting file can be restored.
Choose "Tool" > "Restore System Settings" or click on the "New System" window
➤ P.60, ➤ P.81, the "Restore System Settings" window will be shown.
1) Connect the PC to the network to which the station is connected.
2) Enter the system name which the setting file to be restored.
• 1-64 alphanumeric characters
3) Choose the internet protocol version for the system.
4) Click , the stations will be searched and shown in the "Station List" window.
(Searching may take several minutes.)
• The stations without power and the stations in the process of initialization will not be
subject to search.
• Search up to 1,000 stations at a time.
5) In "Station List," check the station which the setting file to be restored.
• If the station number is duplicated or does not exist, the setting file will not be restored.
• To select or unselect the stations in a batch, choose the station type for a batch selection
and click or .
6) Enter "Administrator ID" and "Administrator Password" of the station which the setting file to
be restored.
• If "Administrator ID" and "Administrator Password" is incorrect, the setting file cannot be
restored.
• The default "Administrator ID" and "Administrator Password" are "admin."
7) Click .