Aiphone IX-MV - Paging Settings

System Settings (Settings (Station View))
257
6.3. Paging Settings
6.3.1. Paging Pretone Setting
 Pretone ♠
6.3.2. Paging Time Setting (Master Station only)
 Paging Timeout [sec] ♦♠
6.3.3. Paging Output Setting (Door Station only)
 Paging Audio Output (same as Contact / Audio Output Settings)
Description Choose to enable/disable the Pretone function when the station is paged.
Settings •ON
•OFF
Default values ON
Description Set maximum time for a page.
Settings 10-600 sec (by 1 sec)
Default values 30 sec
Description Set how audio is to be delivered.
The entry is identical to "Audio Output" ➤ P.238 and "Paging Audio Output (same
as Contact / Audio Output Settings)" ➤ P.258. When the setting is changed, "Audio
Output" ➤ P.238 and "Paging Audio Output (same as Contact / Audio Output
Settings)" ➤ P.258 will be changed as well.
Settings • Built-in Speaker for communication and paging
• Audio Output for communication and paging
• Built-in Speaker for communication, Audio Output for paging
Default values Built-in Speaker for communication and paging