Aiphone IX-MV - Station Replacement

Menu bar
99
4.3. Station Replacement
Use this feature to replace a station. The station can only be replaced with the same type.
Click "Tool" > "Station Replacement," the "Station Replacement" window will be shown.
1) Connect the PC to the same network as the station.
• Choose the same protocol as the system. For how to set up the protocol, refer to
"2.10. IX Support Tool Settings" ➤ P.93.
2) Replace the station.
3) Click "Tools" > "Station Replacement," the stations will be searched and the "Station
Replacement" window will be shown. (Searching may take several minutes.)
• The stations without power and the stations in the process of initialization will not be
subject to search.
• Search up to 1,000 stations at a time.
• Click , to search again.
4) In "Station List," check of the station to be replaced.
4)
6)
The MAC address
of the associated
station
will be shown.
If there is no
associates station,
nothing will be
shown.
5)