System Settings (Settings (Station View))
283
4) Click .
If power is turned off while updating the firmware, the station may malfunction.
The station will be inoperable while updating the firmware.
When the firmware is updated, the station will be automatically restarted.
If updating fails, repeat the procedure.
9.2. Initialization
When initializing the station, all settings go back to the default values, and the system log and
incoming/outgoing call history are erased.
Stations are also deleted from the settings in IX Support Tool.
How to initialize the station
Click , the initialization will be started.
In some cases, it may take around 10 minutes for the station to start up after initialization.
The station will be inoperable until restarting is completed.
To Next Page
Loading...
