System Settings (Settings (Station View))
278
8.6. Master Station Display Settings (Master Station
only)
Configure the settings for Master Station display.
Brightness
Time Format ♠
Standby LED State ♠
Description Set the brightness of the monitor.
Settings 1 (Dark) - 10 (Bright)
Default values 6
Description Select the time format for the display on the station.
Settings • mm/dd/yyyy (12h)
• mm/dd/yyyy (24h)
• dd/mm/yyyy (12h)
• dd/mm/yyyy (24h)
• yyyy/mm/dd (12h)
• yyyy/mm/dd (24h)
Default values mm/dd/yyyy (12h)
Description Set to keep the Status indicator on while the station is in standby.
Settings •ON
•OFF
Default values ON