Aiphone IX-MV - Ntp

System Settings (Settings (Station View))
220
2.8. NTP
Configure the settings for NTP. When using NTP, set "Enable NTP ♠" ➤ P.203.
2.8.1. Primary Server
 Address ♠
 Port ♠
Description Set the IP address of the primary NTP server.
When using a "Hostname," set up "2.2. DNS" ➤ P.209 .
Settings [IPv4]: 1.0.0.0-223.255.255.255 or Hostname (1-64 alphanumeric characters)
[IPv6]: ::FF:0-FEFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF or Hostname (1-64
alphanumeric characters)
Default values -
Description Set the communication port for the NTP server.
Settings 1-65535
Default values 123