System settings (Settings (Table View))
135
2.8.2. Secondary Server
Address [IPv4]
Address [IPv6]
Port
2.8.3. Synchronization Interval [hour]
Synchronization Interval [hour] ♦
Description Set the IPv4 address of the secondary NTP server.
When using a "Hostname," set up "2.2. DNS" ➤ P.120.
Settings 1.0.0.0-223.255.255.255 or Hostname (1-64 alphanumeric characters)
Default values -
Description Set the IPv6 address of the secondary NTP server.
When using a "Hostname," set up "2.2. DNS" ➤ P.120.
Settings ::FF:0-FEFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF or Hostname (1-64
alphanumeric characters)
Default values -
Description Set the communication port for the NTP server.
Settings 1-65535
Default values 123
Description Set the interval for synchronizing the clock with NTP server.
Settings 1-255 hours (by 1 hour)
Default values 24 hour