No group is registered in the default settings.
 The station preceding and following the station selected will be shown.
For example, if "003" is selected, "002," "003," and "004" are all shown.
 Register up to 50 Groups for each Master Station.
 When choosing "M," configure "2.4. Multicast Address (Master Station and Video Door 
Station only)" ➤ P.122.
 Group Name (furigana) is only accessible when using Japanese or Chinese language.
 Create Group from Location(s)
Create a group with the stations configured for an identical location. 
Click  , the following window will be shown.
1) Check   of the location for which a group is to be created.
2) Click .
Stations belonging to the selected location will be registered in the "Shared Group" section.
• For further steps, refer to "Shared Group Settings" ➤ P.142.