System settings (Settings (Table View))
164
4) Change the door release output specification of the station connected in the door release
settings.
Click then , the settings configured in "6.1.3. Door Release Output
Settings (same as Contact / Audio Output Settings)" ➤ P.160 will be shown.
5) Change the door release output specification.
• When the setting is changed, the settings configured in "6.1.3. Door Release Output
Settings (same as Contact / Audio Output Settings)" ➤ P.160 will be changed as well.
6) When done, click .
7) Click .
Click , to choose the "Destination Station" for " Contact Assignment" of the station being
edited and copy the authentication keys for all other stations to allow for release of all stations.
The key cannot be copied to a station whose authentication key is empty.
To Next Page
Loading...
