Aiphone IX-MV - Page 21

Introduction
21
 To replace a station (For Static IPv4 Address)
Use flowchart to replace a station.
ImpoImportantant
Save the settings after configuring the system.
Refer to "Where the setting file is saved" ➤ P.82.
If the setting file is lost, station settings will need to be reconfigured.
1. Set "Language."
"3. Language" ➤ P.95
2. Retrieve the setting data from the station to
be replaced.
"1.4. Download Settings From Station" ➤ P.83
2. Replace the station.
Note the MAC address of the station to
be replaced.
3. Replace the station.
Note the MAC address of the station to be replaced.
3. Replace the setting data.
* If the settings are modified after being
restored, those changes will not be
reflected.
"4.3. Station Replacement" ➤ P.99
4. Replace the setting data.
"4.3. Station Replacement" ➤ P.99
4. Set "LANGUAGE" of the
replaced Master Station.
Refer to IX Master Station Operation
Manual.
5. Set "LANGUAGE" of the replaced Master
Station.
Refer to IX Master Station Operation Manual.
6. Done. 5. Done.
Can the setting data of the
station to be replaced be
retrieved?
NO
YES