System Settings (Settings (Station View))
232
Individual Settings
Configure the group to be registered in each station.
1) Select the station number to be configured from Settings Station Selection pull-down menu.
2) Scroll to the right using the scroll bar at the bottom of the screen to show the settings station
to be configured.
3) Enter the "Number" and "Group Name" of the group to be set in the Group Registry.
Number: 01 through 99 (2 digits)
Group Name: 1-24 alphanumeric characters
4) Identify the group to be configured in "Group Registry List" section (01 through 50).
5) Identify the stations to be registered to the group in "Station List."
6) Click the cells that correspond to 4) and 5). As the pull-down menu appears, choose blank,
"U," or "M."
U: Station will be registered in the group. When the group is paged, audio is transmitted as
unicast.
M: Station will be registered in the group. When the group is paged, audio is transmitted as
multicast.
7) When done, click .
Settings Station Selection
pull-down menu
Station List Group Registry List Setting Station Name:
Configure a group from the stations
shown.
1)
2)
3)
4)
5)
6)
To Next Page
Loading...
