Aiphone IX-MV - Page 250

System Settings (Settings (Station View))
250
 How to create a Called Station Group
 Shared Called Group Settings
A group registered in the shared group settings will be applied to all Master Stations.
1) Verify that the "Shared Group" table is shown.
If "Shared Group" is not visible, scroll the screen all the way to the left.
2) Identify the called group to be configured in "Group Registry List."
3) Identify the station to be registered in the group in "Master Station list."
4) Click the cells that correspond to 2) and 3). As the pull-down menu appears, choose blank,
"U," or "M/U."
• Blank: The selected station will not be registered.
• U: Station will be registered in the group. A call is transmitted in unicast transmission.
• M/U: Station will be registered in the group. When called, Video Door Station is
transmitted in multicast and Audio Only Door Station in unicast.
5) When done, click .
• When clicking , the data entered in the shared called group will be registered
to each Master Station, and will be removed from the shared called group section.
6) Click .
Master Station list Group Registry List
Nine groups can be set
up for each station.
Setting Station Name
Configure a group from the stations
shown.
3)
1)
4)
2)