Introduction
48
To add a station (For IPv6 Address with DHCP)
Use flowchart to add a station.
1. Verify managed DHCP environment exists and that each station has been assigned
a static IP address.
DUID of the station is "00030001 + MAC address."
2. Set "Language."
"3. Language" ➤ P.95
3. Retrieve the setting data for all the stations.
"1.4. Download Settings From Station" ➤ P.83
4. Add the setting data.
"System settings (Settings (Table View))" ➤ P.107
First, add the station data to "1. Station Information" ➤ P.108.
5. Install the station to be added.
6. Choose "IPv4" for the communication method of IX Support Tool.
"2.10. IX Support Tool Settings" ➤ P.93
7. Associate the created setting data to each station.
"4.2. Association Settings" ➤ P.97
The station is restarted and the IPv6 Address assigned by DHCP server beforehand will be assigned.
If a DHCP address cannot be assigned, it will default to "FDC2::7000."
8. Choose "IPv6" for the communication method of IX Support Tool.
"2.10. IX Support Tool Settings" ➤ P.93
9. Upload the setting data to all the stations.
"1.5. Upload Settings To Station" ➤ P.85
10.Set the clock of the added station.
"1.3. Time" ➤ P.113
11.Set "LANGUAGE" of the added Master Station.
Refer to IX Master Station Operation Manual.
12.Done.
To Next Page
Loading...
