13
Before Using
User Interface
2
Operation Screen
*1 This may not be displayed depending on the settings.
No. Description
1
Tap to display the Call by Unit Number Screen (this screen). Enter the Unit Number to call the person to visit.
*1
“Calling using the keypad (→page 17)”
2 Tap to display the Search by List Screen. Select a person to visit from the Direct Call List and then call the person to
visit.
*1
“Calling using the Direct Call List (→page 19)”
3
Tap to display the Search by Name Screen. Search for a person to visit and then call the person.
*1
“Calling by searching for a name (→page 20)”
4 Tap to display the Door Release Keypad. Enter the Access Code to unlock the door.
“Releasing by entering Access Code (→page 25)”
5 Tap to select a building to call for a Multi-building system.
The selected building name will be displayed.
*1
6
Hearing aid (T mode compatible symbol)
*1
Creates a hearing loop to make it easier to hear audio for hearing aids with T mode.
7 Tap to select the display language.
“Selecting the Display Language (→page 28)”
Example: Call by Unit Number Screen
1
23 4
5
6
7
To Next Page
Loading...
