Design Data – Water Cooled & Free Cooling
Calculation of Design Volumetric Flow Rate (l/s)
7KHPD[LPXPGHVLJQYROXPHWULFÀRZUDWHFDQEHFDOFXODWHGXVLQJWKHIROORZLQJHTXDWLRQ
4 ী[ȡ[&
p
[ǻ7
Where:
Q = Total Heat Rejection (kW).
¨7 7HPSHUDWXUH'LIIHUHQFHEHWZHHQ:DWHU*O\FRO(QWHULQJ/HDYLQJ&
ী 0DVVÀRZRIÀXLGNJV
ȡ 'HQVLW\RI*O\FRO:DWHUPL[WXUHDWGHVLJQFRQGLWLRQ.JPñ5HIHUWRWDEOHEHORZ
C
p
6SHFL¿FKHDWFDSDFLW\DWGHVLJQFRQGLWLRQ.M.J.
&DOFXODWLRQRI,QGRRU8QLW3UHVVXUH'URS¨Ps)
The maximum indoor unit pressure drop can be calculated using the following equation:
¨3V ¨3Z[3
x
8VLQJWKHYROXPHWULFÀRZUDWHFDOFXODWHGDERYHWKHSUHVVXUHGURS¨3ZFDQEHWDNHQIURPWKHUHOHYDQWSUHVVXUHGURS
graph..
Where:
¨3V 0D[LPXP:DWHU*O\FRO3UHVVXUH'URSIRUWKHLQGRRUXQLWN3D
¨3Z (TXLYDOHQW:DWHU3UHVVXUH'URSIRULQGRRUXQLWN3D
P
x
*O\FRO3UHVVXUH'URS&RUUHFWLRQ)DFWRU#&:DWHU7HPSHUDWXUH
7KHUHVXOWDQWSUHVVXUHGURS¨3VLVWKHPD[LPXPSUHVVXUHGURSEDVHGRQWKHLQGRRUXQLWUXQQLQJDWWKHSUHVFULEHG
conditions.
This will typically occur when the water/glycol temperature is approximately 20°C and the water/glycol is being circulated
through the free cooling coil and through the water cooled condenser.
The indoor unit pressure drop will reduce at other operating conditions.
SmartCool™ 16 - 60
Precision Air Conditioning
44 SmartCool Technical Manual 7525371 V1.2.0_03_2013