Airflow TA465 - Page 27

Operation 21
When set to Auto-save, the Sample Time can be adjusted. Sample
Time is the time period over which the Sample will be averaged.
DATA LOGGING
Measurements
Log Mode Auto-save
Log Settings
Choose Test Test 001
Name Test
View Data
Delete Data
% Memory
SAMPLE TIME
00:05
Min:Sec
Cont-key Logging
In Cont-key mode, the user starts logging by pressing the key.
The instrument will continue logging until the key is pressed
again.
DATA LOGGING
Measurements
Log Mode Manual
Log Settings
Choose Test Test 001
Name Test
View Data
Delete Data
% Memory
LOG MODE
Manual
Auto-save
Cont.-key
Cont.-time