22
Enabling/Disabling Service Reminder
5.5 Enabling/Disabling Service Reminder
There is a built-in service reminder in the system for half year, one year and two
years to automatically display an alert notifying customers that the air
conditioning system is due for service. Installers can also use this feature to leave
their details such as their names and contact number.
The service reminder will display ‘HALF YEAR SERVICE DUE’, ‘ONE YEAR SERVICE
DUE’ or ‘TWO YEAR SERVICE DUE’ and installer’s name and contact number on
console for the set number of days if it has been enabled for half year (182 days),
one year (364) and two years (728 days) respectively since the air conditioning
system has been commissioned or serviced. The Running days in the ‘Service’
screen will automatically reset to 1 after 728 days or can be manually changed.
The Service Reminder is disabled by default but can be enabled as follows:
a) In the ‘Installer’ settings screen, touch Service to enter the ‘Service’ screen.
b) Touch the service reminder option buttons to enable or disable the relevant
reminders.
c) Touch the edit eld to change to the desired setting. The installer name
and number can be entered by using a keyboard. Make sure to touch Enter
to conrm the input. Touch the number and change Display and Running
days via keyboard input.
Maximum length of the name is 10 characters and the phone number is 12 digits.
Reminder information will be displayed on the screen when the service is due for
the length of display days (5 days in the example). Touch the “x” button on the top
right corner of the message box will clear the alert but the message box will come
back when the screen wakes up from sleep next time.
To not show the message box before the set display days, tick the Don’t Show
Again box before closing the message box.
To Next Page
Loading...