65
AirTouch 2+ application can be downloaded from the following location.
The application is available for free of charge.
For Android Phones: Go to Google Play store from your Android phone and search
for AirTouch 2+ application developed by Polyaire. After downloading the
application, open the le and follow the prompts to install the application on your
phone. The lowest Android version AirTouch 2+ app supports is Android 4.0.3.
For iPhones: Go to the App store and search for AirTouch 2+ application
developed by Polyaire. Tap on the AirTouch 2+ app and press Install. Enter your
iTunes password and the AirTouch 2+ app will be automatically downloaded and
installed on your iPhone. The lowest iOS system AirTouch 2+ app supports is iOS 8.0.
When mobiles and AirTouch 2+ are all connected to the same WiFi and with the
same band, the AirTouch 2+ app will run straight away and the control interface
will come up. If the mobiles and AirTouch 2+ are not in the same WiFi network,
you’ll need internet connection (by other WiFi or 3G/4G network) and password
to run the app. If it’s the rst time to run the app via internet and the app has not
successfully run on the same WiFi network as the AirTouch 2+ before, you will
need the device ID which is an eight digit number and password to run the app
successfully. The device ID can be found:
1. On the console when you get to the Preference setting page
2. On the PCB of main module of AirTouch 2+.
NOTE: Read the User Manual for accessing various functions of the Mobile Apps.
7. Downloading and Installing AirTouch 2+
Application on Mobile
Downloading and Installing AirTouch 2+ Mobile App
To Next Page
Loading...