To Next Page
L
Laura CruzAug 4, 2025
Why does my AirTouch 2 Controller display Error Code FFFE?
- WWayne GilbertAug 4, 2025
Error Code FFFE on your AirTouch Controller suggests there may be an issue with the gateway switch setting or a faulty gateway.
Why does my AirTouch 2 Controller display Error Code FFFE?
Error Code FFFE on your AirTouch Controller suggests there may be an issue with the gateway switch setting or a faulty gateway.
Controls motorized damper position for up to 16 zones.
Mount main/extension modules to roof frame or fitting, avoid indoor unit.
Connect 'Z1' port on main module to the 1st zone damper.
Connect the console to the 'T' port on the main module, or the extension module if two are used.
Connect the main module to the AC unit using the provided kit and follow wiring diagrams.
Configures AC units, modes, fan speeds, and set points.
Connects the system to a WiFi network for remote access.
Steps to connect app via WiFi or internet, including device ID.
Gateway connected but AC not powered or communication lost.
Communication to gateway lost due to switch setting or faulty gateway.
General| Model | AirTouch 2 |
|---|---|
| Category | Controller |
| Display | Yes |
| Controls | Touchscreen |
| Display Type | LCD |