Why does my Airwell FLO 9 DCI Air Conditioner go into protection mode for no clear reason?
If your Airwell Air Conditioner goes into protection mode and the compressor stops for no apparent reason, it could be due to a control or refrigeration system issue. Perform diagnostics as outlined in section 12.3 of the manual and follow the recommended actions.
Why does the indoor fan of my Airwell FLO 9 DCI Air Conditioner work when the unit is OFF?
If the indoor fan of your Airwell Air Conditioner runs even when the unit is off, and the fan speed cannot be adjusted with the remote, it indicates a PCB problem. Replace the controller to resolve this issue.
Why is the power supply indicator not lighting up on my Airwell FLO 9 DCI Air Conditioner?
If the red LED power supply indicator on your Airwell Air Conditioner isn't lighting up, it suggests a power issue. Check the power supply to the unit. If the power supply is OK, check the display and display wiring. If those are OK, replace the controller.
What to do if the compressor is on but the outdoor fan does not work on my Airwell FLO 9 DCI Air Conditioner?
If the compressor of your Airwell Air Conditioner is running but the outdoor fan isn't, the problem likely lies with the outdoor electronics or the fan itself. Check the outdoor fan motor following the procedure in section 12.5.3 of the manual. If the motor is not working, replace the controller.
Why is my Airwell FLO 9 DCI Air Conditioner working in the wrong mode?
If your Airwell Air Conditioner is operating in the wrong mode (cooling instead of heating, or vice versa), the issue might be with the electronics or the power connection to the RV. Check the RV power connections first. If those are OK, check the RV operation with a direct 230VAC power supply. If it still doesn't work, replace the outdoor controller.
Why does my Airwell FLO 9 DCI compressor stop during operation?
If the compressor in your Airwell Air Conditioner stops while running, but the green LED stays on, it indicates an electronic control or power supply issue. You should perform diagnostics as described in section 12.3 of the manual and follow the actions based on the diagnostic results.
What to do if the indoor fan of my Airwell FLO 9 DCI Air Conditioner doesn't start?
If the louvers are open and the green LED is lit, but the indoor fan of your Airwell Air Conditioner isn't starting, here are a couple of things to check: * If the unit is in heat mode, the coil might not be warm yet. Try switching to cool mode to see if the fan starts. * There could be a problem with the PCB or capacitor. Set the fan to high speed and check if the power supply to the motor is higher than 130VAC (for triack controlled motors) or higher than 220VAC for fixed speed motors. If the power supply is OK, replace the capacitor. If not, replace the controller.
What to do if the compressor does not start on my Airwell FLO 9 DCI?
If the compressor on your Airwell Air Conditioner isn't starting, it could be due to an electronics control problem or a protection being activated. To resolve this, perform diagnostics as described in section 12.3 of the manual and follow the recommended actions.
How to fix water leaking from my Airwell FLO 9 DCI indoor unit?
If you notice water leaking from the indoor unit of your Airwell Air Conditioner, it's likely that the drainage tube is blocked. Inspect the tube and clear any obstructions to allow proper drainage.
Why is my Airwell Air Conditioner not cooling or heating even though all components are operating?
If your Airwell Air Conditioner's components are running but there's no cooling or heating, it's likely due to a refrigerant leak. Checking the refrigeration system is recommended.
General| Type | Split System |
|---|---|
| Cooling Capacity | 2.6 kW |
| Refrigerant | R32 |
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Outdoor Unit Weight | 23 kg |
| Noise Level | Outdoor: 50 dB(A) |
| Outdoor Unit Dimensions (WxHxD) | 700 x 500 x 240 mm |
Details on High Technology and System Features, including R410A compatibility and IAQ.
Information on flare type tubing and provided indoor unit manuals.
Detailed technical specifications for the TRIO-72 DCI outdoor unit.
Detailed technical specifications for the QUATTRO-80 DCI outdoor unit.
Specifications for FLO, K, SX, and BS series indoor units.
Defines the operational temperature and voltage limits for cooling and heating modes.
Dimensional drawings for FLO, K, SX, and BS series indoor units.
Dimensional drawings for TRIO-72 and QUATTRO-80 DCI outdoor units.
Cooling and heating performance data for Trio-72 DCI with various combinations.
Cooling and heating performance data for Quattro-80 DCI with various combinations.
Cooling/Heating factors and correction factors for all indoor units.
Correction factors for cooling and heating based on tubing length.
Correction factors by model and examples for capacity calculations.
Pressure curves for TRIO-72 DCI in cooling and heating modes.
Pressure curves for QUATTRO-80 DCI in cooling and heating modes.
Factors for tubing length, ODU code, and calculation examples.
Electrical specifications for Trio-72 and Quattro-80 DCI outdoor units.
Wiring diagrams and electrical connection details for outdoor units.
Refrigerant system diagram for Trio-72 and Quattro-80 DCI outdoor units.
Information on tubing parts, bending, and connection torque specifications.
Block diagram, compressor, fan, RV, EEV, HMI, dry contacts, sensors, base heater.
Initialization process, IDU setup, and communication/temp failure handling.
Fan control, modes, heating, dry contact, unit indicators.
Run mode, compressor/fan speed, EEV, RV, base heater, protections, deicing.
Procedures for installation testing and technician diagnostic modes.
UI description, key functions, main menu, and submenus.
Definitions and settings for OFAN and compressor jumpers.
General and model-dependent SW parameters for indoor units.
General failures, ODU/IDU diagnostics, and fault codes.
Procedures for checking voltage, fuse, motor, compressor, EEV, etc.
Visual breakdowns and parts lists for Trio-72 and Quattro-80 DCI outdoor units.
Contains details for the installation and operation manual.
To Next Page