Why is my Airwell Air Conditioner not responding to the remote control?
If your Airwell Air Conditioner isn't responding to the remote, the issue might be with the remote itself or the receiver in the unit. First, check the remote's batteries. If they're fine, inspect the display and its wiring within the Air Conditioner. If those are also working, try replacing the display PCB. As a last resort, the controller might need replacing.
What to do if my Airwell FLO 9 DCI Air Conditioner has water leakage from the indoor unit?
General| Type | Split System |
|---|---|
| Cooling Capacity | 2.6 kW |
| Refrigerant | R32 |
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Outdoor Unit Weight | 23 kg |
| Noise Level | Outdoor: 50 dB(A) |
| Outdoor Unit Dimensions (WxHxD) | 700 x 500 x 240 mm |
Details on High Technology and System Features, including R410A compatibility and IAQ.
Information on flare type tubing and provided indoor unit manuals.
Detailed technical specifications for the TRIO-72 DCI outdoor unit.
Detailed technical specifications for the QUATTRO-80 DCI outdoor unit.
Specifications for FLO, K, SX, and BS series indoor units.
Defines the operational temperature and voltage limits for cooling and heating modes.
Dimensional drawings for FLO, K, SX, and BS series indoor units.
Dimensional drawings for TRIO-72 and QUATTRO-80 DCI outdoor units.
Cooling and heating performance data for Trio-72 DCI with various combinations.
Cooling and heating performance data for Quattro-80 DCI with various combinations.
Cooling/Heating factors and correction factors for all indoor units.
Correction factors for cooling and heating based on tubing length.
Correction factors by model and examples for capacity calculations.
Pressure curves for TRIO-72 DCI in cooling and heating modes.
Pressure curves for QUATTRO-80 DCI in cooling and heating modes.
Factors for tubing length, ODU code, and calculation examples.
Electrical specifications for Trio-72 and Quattro-80 DCI outdoor units.
Wiring diagrams and electrical connection details for outdoor units.
Refrigerant system diagram for Trio-72 and Quattro-80 DCI outdoor units.
Information on tubing parts, bending, and connection torque specifications.
Block diagram, compressor, fan, RV, EEV, HMI, dry contacts, sensors, base heater.
Initialization process, IDU setup, and communication/temp failure handling.
Fan control, modes, heating, dry contact, unit indicators.
Run mode, compressor/fan speed, EEV, RV, base heater, protections, deicing.
Procedures for installation testing and technician diagnostic modes.
UI description, key functions, main menu, and submenus.
Definitions and settings for OFAN and compressor jumpers.
General and model-dependent SW parameters for indoor units.
General failures, ODU/IDU diagnostics, and fault codes.
Procedures for checking voltage, fuse, motor, compressor, EEV, etc.
Visual breakdowns and parts lists for Trio-72 and Quattro-80 DCI outdoor units.
Contains details for the installation and operation manual.
To Next Page