1-3
INTRODUCTION
SM PNXDCI 1-A.1 GB
1.7 Outdoor Unit
The PNX DCI INV outdoor units can be installed as floor or wall mounted units by using
a wall supporting bracket. The metal sheets are protected from corrosion paint work
allowing long life resistance. All outdoor units are pre-charged. For further information
please refer to the Product Data Sheet, Chapter 2.
Outdoor Unit Feature
Feature GC 9 DCI GC 12 DCI GC 18 DCI GC 21 DCI GC 24Z DCI
Display 3 LED’s
Base Heater Optional
Outdoor Fan Variable speed DC Inverter
1.8 Tubing Connections
Flare type interconnecting tubing to be produced on site.
For further details please refer to the Installation Manual.
1.9 Accessories
Item Description
MIU (LEX) MODBUS interface unit
RS485 Adapter
To be used as an interface
with RCW or μBMS remote
controllers
Base Heater
M2L cable Port
1.10 Inbox Documentation
Each unit is supplied with its own installation and operation manuals.