AJA HD10MD4 - HD10 MD4 I;O Connections; User Controls

HD10MD4 Mini-Converter v1.1 www.aja.com
6
• Uses universal input +5V power supply AJA model DWP-U-R1 (included)
NOTE: The HD10MD4 automatically switches to PAL anytime the input is 1080i 50, 1080PsF 25 or
1080p25. All other frames rates have an NTSC output: 59.94, 29.97 and 23.98.
HD10MD4 Simplified Block Diagram
HD10MD4 I/O Connections
NOTE: The LOCK LED indicates valid input video by color. Off is no signal, green is SD video, red is HD
video.
User Controls
The direct user interface for the HD10MD4 is an eight position DIP switch accessible
through a cut-out in the bottom of the unit. The exact function of the DIP switches are
described in
“DIP Switches” on page 8.
The HD10MD4 also supports Mini-Config application control over its USB port to a
connected PC or Mac.
Component/
Composite Outputs
(selected by DIP switch
or Mini-Cong)
HD or SD
SDI Input
De-serializer
Cable EQ
SD SDI Output
Y G Composite
Pb B Y
Pr R C
D/A
Conversion
H & V
Filtering and
Decimation
Audio
Embedding
Embedded
Audio
Extraction
Delay
Serializer
HD-SDI Out 1
USB
Port
Cong
Control
DIP
Switch
Settings
3:2 Pulldown Synchronization
Composite/
Component
Output BNCs
HD-SDI
Input BNC
HD-SDI
Loop Output
BNC
SD-SDI
Output BNC
LOCK LED
USB Port
DC Power
Input