Connecting
Before starting connection
Only users with administrator rights can add the device to the hub.
How to connect the detector to the hub
1. Following the hub user guide, install the . Create the account, add the
hub, and create at least one room.
Ajax app
2. Switch on the hub and check the internet connection (via Ethernet cable and/or
GSM network).
3. Make sure that the hub is disarmed and does not update by checking its status
in the Ajax app.
1. Select Add Device in the Ajax app.
2. Name the device, scan or type the QR code (located on the detector body and
packaging), and select the location room.
To Next Page
Loading...
Need help?
General
