MAINTENANCE WORK
! WARNING !
Improper maintenance or failure
performs of recommended
maintenance increases the chance
of accident or motorcycle damage.
Always follow inspection and
maintenance recommendations and
schedules in this owner’s manual.
Ask your AJP dealer to do the
maintenance items marked with an
asterisk (*). You may perform the
unmarked maintenance items by
referring to instructions in this
section, if you have mechanical
experience. If you are not sure how
to do any of the jobs, have your AJP
dealer to do them.
! CAUTION !
- When cleaning your motorcycle,
do not use a high-pressure
cleaning unit, otherwise water will
penetrate bearings, carburettor,
electric connectors, etc.
- When transporting your AJP,
ensure that it is held upright with
restraining straps.
- Use only special screws with an
appropriate thread length supplied
by AJP to fix fuel tank. Using other
screws or longer ones can cause
cracks in the tank through which
fuel can flow out.
- Let your motorcycle cool down
before beginning any maintenance
work in order to avoid get burned.
- Remove oil, grease matters,
filters, fuel, washing detergents,
etc, orderly.
- Under no circumstances may
used oil be disposed off in the
sewage system or in the open
countryside. Remember: 1 litre of
used oil contaminates 1.000.000
litres of water!
LUBRICATION POINTS
Proper lubrication is important for
smooth operation and long life of each
working part of your motorcycle and
also for safe riding. It is a good practice
to lubricate the motorcycle after a long
rough ride and after getting in snow,
wet, mud or after washing it. Major
lubrication points are indicated.
PR4 User’s manual Page
17
To Next Page
Loading...
