14
Installation
Attaching the Stand
Step 1
Place a soft cushioned material on top of a
flat surface to prevent damaging the screen
panel. Then place the TV screen flat on top,
with the screen side facing down.
Step 2
Align the stand base to the installation point
on the TV.
Step 3
Tighten the screws (supplied) with a
screwdriver to affix the stand to the panel.
Important:
• Do not apply excessive force as this may
damage the screw holes.
• Unplug the power plug first when installing or
removing the TV stands.
• To avoid damaging the TV, we recommend
asking someone to help with installation and/
or removal of the stand.
IMPORTANT!
• Make sure the TV set is unplugged from the power supply before
installing or removing the stand.
• The TV panel may be awkward to install on your own. We recommend
you ask someone to help with installation and/or removal of the stand.
Your TV is packaged with two stand legs, to be attached to the TV. Before
using the TV, install the stands as described below.
If you want to mount the TV to a wall instead, see the next page for mounting
advice (the wall mount is not included).
2
1
3
R
L
To Next Page
Loading...
Need help?
General
