55
Menus (Cont.)
Wireless Network Setup
You can connect your TV to your LAN through a standard wireless router or
modem.
Wireless Network Configuration
Most wireless network systems incorporate a security system that requires
devices that access the network through an access point or wireless router
(typically a wireless IP Sharer) to transmit an encrypted security code called an
access key.
Wireless Network Setup
How to set up Wi-Fi:
1. Turn on your TV, press the MENU button on your remote, use the /
buttons to select Network, and then press the OK button.
2. Press the / button to select Network, and then press the / button
to select Interface setting to Wireless.
3. Select Wireless Settings. Then press the OK button to proceed to the
next menu.
4. Select ‘Scan’ then press the OK button. The Network function searches
for available wireless networks. When done, it displays a list of the
available networks.
5. In the list of networks, press the / button to select a network, and
then press the OK button.
6. Enter your network’s password using the on-screen keyboard. Use the
/ / / buttons on the remote control to select a character and press
OK to enter it.
7. Input the correct password and select OK and press the OK button to
connect to the network.
Set up a Wireless connection manually
1. Follow steps 1-3 in the ‘How to set up Wi-Fi’ procedure.
2. Set Wireless Settings to ‘Manual’
3. Enter your Wi-Fi network name (SSID) using the on-screen keyboard.
4. Select the Wi-Fi security mode and enter the Wi-Fi password using the
on-screen keyboard.
5. When done, select OK and press OK to connect to the Internet
To Next Page
Loading...
