Akai AK3219NF

28
Getting Started (Cont.)
Step Four:
Connect to the Internet
Use the / buttons to select your connectivity mode (Wired or Wi-Fi), then
press the OK button.
Wired Mode
1. Connect an Ethernet cable to the LAN socket on the TV and your modem.
2. Select ‘Wired’ mode and press OK.
3. Select the connection mode: Auto or Manual, then press OK.
Auto:
• The TV will automatically detect network addresses from your modem
and show a ‘Connected’ message on the screen.
• Press the button to go to the next step.
Manual:
• You can manually assign network addresses. Use the number keypad on
the remote to enter network addresses.
• When done, select OK and press the OK button on the remote to
connect.
• When you receive a ‘Connected’ message on the screen, press the
button to go to the next step.
Wi-Fi Mode
1. Select ‘Wireless mode’ and press OK.
2. Select the connection mode: Scan, Manual or Auto, then press OK.
Scan:
• The TV will scan for nearby Wi-Fi access points. Select your home Wi-
Fi name and press OK. You will then be prompted to enter your Wi-Fi
password.
• Press OK to access the on-screen keyboard. Use the / / /
buttons to enter your Wi-Fi password and then press OK.
• When connected, press the button to go to the next step.