26
Getting Started
Powering the TV
• Plug the power cord into a suitable power outlet, then turn on the power
at the outlet.
• Press the POWER button, beneath the IR sensor (or on the remote
control, aiming it at the sensor at the front of the TV); the indicator light
will not glow. Press the power button on the remote control to turn the TV
off; when in standby mode, the indicator light will glow red.
Installation Guide
When you switch on the TV for the first time, the First Time Setup menu will be
displayed on the screen, as illustrated below.
Setup navigation
• Press the / / / buttons to select different sub-menus.
• Press the OK button to confirm settings.
Step One:
Language
• Use the / buttons to select your On-Screen Display (OSD) language
and then press the OK button to go to the next step.
IMPORTANT!
Make sure all relevant equipment is properly connected (see previous pages)
before connecting the unit to a wall socket and turning on the power.
To Next Page
Loading...
