57
Timer
Enter the sub-menu to adjust the following options:
Time Zone: Manually selects the local time zone.
Country Region: Set the time zone.
Clock: Select ‘ON’ to turn the Auto Synchronization. The TV will retrieve the
time automatically from DTV signals. The Time cannot be manually adjusted
when the clock is ON. Select ‘OFF’ you can set the options manually.
Sleep Timer: This function allows you to set a period of time after which the
TV goes into standby mode.
Auto Standby: When Auto Standby is set to your desired time, TV and device
will be in Standby Mode at the same time.
Lock
This menu can control the special function for TV channels.
The factory default code: 0000
The master password: 4711
If you forget your code, enter the master password to override any existing
codes. Enter the sub-menu to adjust the following options: Channel lock,
parental rating, input lock, front panel lock, installation lock, change password,
maximum volume or clean all.
Input settings
Select the Device Name of the input source here so it is easy to identify the
source.
Location
Select the Location Mode based on your viewing environment.
T-Link
Use this function to turn on the ARC function and search for CEC devices
connected to the HDMI sockets in your TV.
Auto Source
Select ON to open Auto Source.
Menus (Cont.)
To Next Page
Loading...
